How to Pre-Treat T Shirts for DTG Printing

How to Pre-Treat T Shirts for DTG Printing


How to Pre-Treat T Shirts for DTG Printing


When it comes to printing, there are a few different methods that can be used. One of the most popular methods is DTG printing. DTG printing is a great option for those who want to print on a variety of different materials. The process is simple and quick, and it produces high-quality results.

DTG printing is also very versatile, and it can be used to print on a variety of different materials, including cloth, paper, and even metal.  

If you're a fan of printed t-shirts, then you know that Direct to Garment (DTG) printing is the best way to go. But what about pretreating your fabric before you print? Do you have to do it? The answer is...maybe! Keep reading to find out more.

Do you have to pretreat DTG?

If you're considering using direct-to-garment (DTG) printing for your next project, you might be wondering if you need to pretreat the fabric first. The answer is: it depends. If you're using a light-colored shirt, pretreatment is usually not necessary. However, if you're printing on a dark shirt or a fabric with a lot of texture, pretreating the fabric can help to ensure that the ink adheres properly.

There are a variety of pretreatment options available, and the best choice for your project will depend on the type of fabric you're using. So, do some research and talk to your printer before making a decision. And remember, even if you don't pretreat your fabric, DTG printing can still produce amazing results.

Tips for pretreating t-shirts for DTG printing

You love your t-shirts. They are soft, comfortable, and make you look good. But there is one problem: they are not suitable for DTG printing. The fabric is too thick and the seams are not flat, which means that the ink will not adhere properly to the shirt.

Luckily, there is a solution: pre-treating the shirts before printing. Here's how to do it.

1. Start by washing the shirts in a hot water cycle with a mild detergent. This will remove any dirt or oils that may be on the fabric and provide a clean surface for the pre-treat solution to adhere to. 

2. Next, mix up a batch of pre-treat solution according to the directions on the package. The ratio of water to pre-treat powder will vary depending on the brand, so be sure to follow the directions carefully.

3. Once the solution is mixed, use a spray bottle to evenly apply it to both sides of the shirt. Be sure to saturate the fabric completely; you don't want any dry spots where the ink won't adhere.

4. Now comes the waiting game. Allow the shirts to air dry completely; this could take several hours or even overnight. Do not put them in the dryer! Once they are completely dry, they are ready for DTG printing near me.

Wrap up!

Pre-treating shirts for DTG printing is easy and only takes a few simple steps. By following these instructions, you can ensure that your shirts will print properly and look great!

Amanda Ryan
By Leah Mondragon